Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E110 — Toshiba e-Studio 2830c

Code: E110

Description: ADU misfeeding (Paper not reaching the registration sensor): The paper which has passed through ADU does not reach the registration sensor during duplex printing.
Causes: Registration sensor LGC board ADU clutch Rollers in the ADU
Remedy: Paper stop jam at the registration roller position Registration guide Check the registration guide. Replace it if needed. All Registration sensor • Sensor check (Perform the input check: 03- [ALL]OFF/[7]/[F]) • Connector check (CN337) • Harness check LGC board • Board check • Connector check (CN337, CN338) • Harness check ADU clutch • Clutch check (Perform the output check: 03- 222) • Connector check (CN338) • Harness check ADU Check if the connector between the ADU and equipment is connected.

← Xem tất cả mã lỗi Toshiba e-Studio 2830c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie