Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C4E2 — Toshiba e-Studio 3005AC

Code: C4E2

Description: Fuser belt rotation detection sensor abnormality. The fuser belt does not rotate or does so incorrectly/the abnormality of the sensor of the fuser unit (front/color of harness: yellow)
Causes: Fuser belt rotation detection sensor Detection plate (rotor) Dirty/damaged Fuser belt Deformed/damaged Bushing of fuser belt drive shaft Worn Bushing of fuser drive unit Worn Drive plate Bend section broken Gear Teeth damaged, worn LGC board Fuser motor
Remedy: Fuser unit • Fuser belt rotation detection sensor check (Input check: 03-[ALL]OFF/[6]/[A]) • Connector check in the fuser belt rotation sensor • Harness check in the fuser belt rotation sensor • Rotation detection plate (rotor) check • Grease check in the gear (shaft / tooth flank) • Fuser belt check • Check if the bushing of fuser belt drive shaft is worn. • Fuser unit installation check (Check that the levers fixing the fuser unit are lifted up.) Fuser belt rotation detection sensor • Sensor check (Input check: FS-03-[ALL]OFF/[6]/[A]) • Connector check in the fuser belt rotation sensor (CN306, J604) • Harness check in the fuser belt rotation sensor Fuser drive unit • Bushing check • Check that the drive unit is correctly installed (3 dowels). • Check that the drive metal plate is not broken. • Check that the gear is not damaged or worn. • One-way clutch check • Grease check in the gear (shaft / tooth flank) LGC board • Connector check (CN305, CN306) • Board check. Fuser motor • Motor check (Perform the output check: FS-03-113/163) • Connector check (CN305, J603) • Harness check

← Xem tất cả mã lỗi Toshiba e-Studio 3005AC

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie