Description: Punch motor (M3) home position detection error MJ-1109/1110 (When MJ-6105 is installed) * The [CC61] error occurs when the [E9F0] error occurs three times in succession or during the initial operation.
Causes: Punch home position sensor (S4) Punch motor (M3) Hole punch control PC board (HP)
Remedy: Paper If there is any paper remaining on the transport path, remove the paper. Punch motor (M3) • If there is mechanical problem when the punch motor (M3) is rotated, fix the mechanism. • Check the connector (CN2) and harnesses between the hole punch control PC board (HP) and punch motor (M3). Punch home position sensor (S4) • Sensor check • Harness check • Connector check (CN3)