Description: Paper not reaching the transport sensor after a registration jam
Causes: Registration pass sensor Rollers Developer unit
Remedy: Paper stop jam at Registration roller Registration pass sensor • Sensor check (Perform the input check: FS-03- [ALL]OFF/[9]/[F]) • Connector check (CN309, J620, J621) • Harness check Drawer Check if any damage is at the leading edge. Check if paper is folded at the leading edge. Drive unit, Rollers • Drive unit check • Gear check • Roller check Developer unit Replace the Developer unit. Aligning amount If the aligning amount is too small, a skew, an image dislocation in the feeding direction, E013 (a paper jam occurring between the registration pass sensor and the paper clinging detection sensor) may happen. If the aligning amount is too large, on the other hand, an abnormal noise (paper-folding noise) or actual paper folding may occur. Confirm that the value of the aligning amount is appropriate. Refer to ƒt P. 6-8 "6.1.6 Paper alignment at the registration roller".