Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E340 — Toshiba e-Studio 3005AC

Code: E340

Description: Paper transport jam in the PFP lower drawer (paper not reaching the 1st drawer feed sensor)
Causes: 1st drawer feed sensor Transport clutches (high speed) Transport clutches (low speed) PFC board LGC board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. Transport roller Replace it if it is worn out.
Remedy: Bypass paper guide • Check if the bypass paper guide is warped. • Reassemble the bypass separation roller holder since it is possibly disengaged. Feed sensor • Sensor check (Perform the input check: FS-03-[ALL]OFF/[9]/[B]) • Connector check (CN458, J659, J661) • Harness check Transport clutches (high speed) • Clutch check (Perform the output check: FS-03-230) • Connector check (CN461, J664) • Harness check Transport clutches (low speed) • Clutch check (Perform the output check: FS-03-233) • Connector check (CN461, J665) • Harness check PFC board • Board check • Connector check (CN461, CN452, CN458) • Harness check LGC board • Board check • Connector check (CN323) • Harness check

← Xem tất cả mã lỗi Toshiba e-Studio 3005AC

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie