Code: EAB1
Description: [MJ-1110] Short paper jam in the saddle stitch unit
Causes: Feeding sensor (S22) Junction box paper detection sensor (S26) Transport path-2 sensor (S27) Transport path-3 sensor (S28) Ejecting roller sensor (S29) Finisher control PC board (FIN) Saddle control PC board (SDL)
Remedy: Paper • Check if there is any paper in the finisher, saddle stitcher or the on the transport path of the equipment. Remove it if there is. • Use paper accepted in the specifications. Feeding sensor (S22) • Sensor check (S22) • Connector check (CN1) • Harness check Junction box paper detection sensor (S26) • Sensor check (S26) • Connector check (CN1) • Harness check Transport path-2 sensor (S27) • Sensor check (S27) • Connector check (CN3) • Harness check Transport path-3 sensor (S28) • Sensor check (S28) • Connector check (CN3) • Harness check Ejecting roller sensor (S29) • Sensor check (S29) • Connector check (CN3) • Harness check Harness Check if the flat cable between the finisher control PC board (FIN) and the saddle control PC board (SDL) is disconnected or open circuited. Correct if so. (Replace the harness if open circuited. Reconnect the connector securely if there is any disconnection.) Finisher control PC board (FIN) • Board check • Connector check (CN1, CN21) • Harness check Saddle control PC board (SDL) • Connector check (CN3, CN6) • Board check