Description: [MJ-1110] Paper exit jam in the saddle stitch unit
Causes: Exit sensor (S31) Saddle control PC board (SDL) Finisher controller PC board (FIN)
Remedy: Paper • Is there any paper remaining in the paper transport path of the equipment or the saddle stitch section of the Finisher? Exit sensor (S31) • Sensor check • Connector check (CN7) • Harness check Harness Check if the harness between the finisher controller PC board (FIN) and the saddle control PC board (SDL) is disconnected or open circuited. Correct if so. (Replace the harness if open circuited. Reconnect the connector securely if there is any disconnection.) Finisher control PC board (FIN) • Board check • Connector check (CN21) • Harness check Saddle control PC board (SDL) • Connector check (CN6, CN7) • Board check