Code: C1A0
Description: LCF end fence motor is abnormal
Causes: LCF board LGC board LCF end fence motor LCF end fence home position sensor LCF end fence stop position sensor
Remedy: 1 Is the LCF end fence motor working? (Perform the output check in the test mode: FS-03-207) Yes 2 No 1. Check if the connector of the LCF end fence motor is disconnected. (CN5, CN51) 2. Check if any of the connectors CN100 and CN101 on the LCF board is disconnected. 3. Check if the connector CN315 on the LGC board is disconnected. 4. Check if the connector pins are disconnected and the harnesses are open circuited. 5. Check if the conductor patterns on the LCF board and LGC board are short circuited or open circuited. 2 Are the LCF end fence home/stop position sensors working? (Perform the input check in the test mode: 03- [FAX]OFF/[5]/[D], /[5]/[C]) Yes 3 No 1. Check if the connectors of the sensors are disconnected. (CN4, CN40, CN400, N402, CN403) 2. Check if either of the connectors CN1 or CN4 on the LCF board is disconnected. 3. heck if the connector CN315 on the LGC board is disconnected. 4. Check if the slit reaches the sensors. 5. Check if the connector pins are disconnected and the harnesses are open circuited. 6. Check if the conductor patterns on the LCF board and LGC board are short circuited or open circuited. 3 LGC board 1. Check if the conductor pattern on the LGC board is short circuited or open circuited. 2. Replace the LGC board. 4 LCF board 1. Check if the conductor pattern on the LCF board is short circuited or open circuited. 2. Replace the LCF board.