Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi CA10 — Toshiba e-Studio 3040c

Code: CA10

Description: Polygonal motor abnormality: The polygonal motor is not rotating normally.
Causes: Laser optical unit LGC board
Remedy: 1 Is the polygonal motor rotating? Yes 3 No 2 2 Polygonal motor Connector check 3 LGC board • Connector check (CN343, J506) • Board check 4 Laser unit cooling fan • Check if the laser unit cooling fan is stopped. • Check if the suction area of the laser unit cooling fan is plugged up. 5 Units with high-voltage • Check if the units with high-voltage (developer unit, transfer belt unit, 2nd transfer roller unit) are securely grounded. • Check if the bias supply joints of the units with high-voltage are securely connected or they are not stained. 6 Plate in the paper transport system Check if the plate in the paper transport system is securely grounded. 7 Equipment Check if the equipment is grounded. 8 Laser unit cooling fan • Check if the laser unit cooling fan is stopped. • Check if the suction area of the laser unit cooling fan is plugged up. e-STUDIO4540C 1 Is the polygonal motor rotating? Yes 2 No 3 2 Is the printed image distorted? Yes 3 No 6 3 POL board • Connector check (connectors on the both edges of the HRNS-POLDRV- 382) • Board check 4 4 LGC board • Connector check (CN343, J506) • Board check 5 5 Laser unit cooling fan • Check if the laser unit cooling fan is stopped. • Check if the suction area of the laser unit cooling fan is plugged up. 6 LGC board Board check 7 Units with high-voltage • Check if the units with high-voltage (developer unit, transfer belt unit, 2nd transfer roller unit) are securely grounded. • Check if the bias supply joints of the units with high-voltage are securely connected or they are not stained. 8 Plate in the paper transport system Check if the plate in the paper transport system is securely grounded. 9 Equipment Check if the equipment is grounded. 10 Laser unit cooling fan • Check if the laser unit cooling fan is stopped. • Check if the suction area of the laser unit cooling fan is plugged up.

← Xem tất cả mã lỗi Toshiba e-Studio 3040c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie