Remedy: MJ-1101 Is there any mechanical problem when the actuator of the movable tray paper-full detection sensor (S17) is moved? ..YES Fix the mechanism. NO Is there a disconnection of the connector, incorrect installation or breakage of the movable tray paper-full detection sensor (S17)? ll ..YES • Connect the connector securely. • Reinstall the sensor correctly. • Replace the sensor. NO Is the harness between the movable tray paper-full detection sensor (S17) and the finisher control PC board (CN13) disconnected or open circuited? l ..YES • Reconnect the connector securely. • Replace the harness. NO Replace the finisher control PC board.