Description: Tray safety switch abnormality - (1) The tray safety switch turned on during tray operation (moving up or down). (2) The tray operated with the tray safety switch turned on. [MJ-1031]
Remedy: MJ-1024 1. Check if the connector J110 on the finisher controller PC board is disconnected from the tray safety switch (SW2) or the harnesses are open circuited. Correct if any. 2. Check if the connector J114 on the finisher controller PC board is disconnected from the stack tray shift motor (M2) or the harnesses are open circuited. Correct if any. 3. Replace the tray safety switch 4. Replace the stack tray shift motor. 5. Replace the finisher control PC board.