Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E120 — Toshiba e-Studio 305

Code: E120

Description: Bypass misfeeding (Paper not reaching the 1st transport sensor): The paper fed from the bypass tray does not reach the 1st transport sensor
Remedy: Open the Automatic duplexing unit. Is there any paper in front of the 1st transport sensor? YES Remove the paper. NO Is the 1st transport sensor working? (Perform the input check in the test mode: 03-[FAX]OFF/[6]/[A]) NO 1. Check if the connector of the 1st transport sensor is disconnected. 2. Check if the connector CN316 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open circuited. 4. Check if the conductor pattern on the LGC board is short circuited or open circuited. 5. Replace the 1st transport sensor. 6. Replace the LGC board. YES Is the bypass feed clutch working? (Perform the output check in the test mode: 03-204) Is the bypass paper sensor working? (Perform the input check in the test mode: 03- [FAX]OFF/[1]/[D]) NO 1. Check if the connector of the bypass feed clutch and bypass paper sensor are disconnected. 2. Check if the connector CN311 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open circuited. 4. Check if the conductor pattern on the LGC board is short circuited or open circuited. 5. Replace the bypass feed clutch and bypass paper sensor. 6. Replace the LGC board. YES Check the bypass feed roller and separation pad. Replace them if they are worn out.

← Xem tất cả mã lỗi Toshiba e-Studio 305

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie