Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E722 — Toshiba e-Studio 305

Code: E722

Description: Jam not reaching the exit sensor (during scanning): The original which passed the read sensor does not reach the exit sensor when it is transported from the scanning section to exit section.
Remedy: 1. Clean the read roller if it is stained. 2. Is the original exit/reverse sensor working? (Perform the input check: 03-[FAX]ON/[7]/[E]) * If it is working properly, proceed to 6. If not, check 3 to 5 below. 3. Check if the connector CN75 on the RADF board is disconnected from the original exit/reverse sensor or the harnesses are open circuited. Correct if any. 4. Replace the original exit/reverse sensor 5. Replace the RADF board. 6. Replace the read roller if it is worn out.

← Xem tất cả mã lỗi Toshiba e-Studio 305

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie