Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E731 — Toshiba e-Studio 305

Code: E731

Description: Stop jam at the exit sensor: The trailing edge of the original does not pass the exit sensor after its leading edge has reached this sensor.
Remedy: 1. Clean the exit roller if it is stained. 2. Is the exit/reverse sensor working? (Perform the input check: 03-[FAX]ON/[7]/[E]) * If it is working properly, proceed to 6. If not, check 3 to 5 below. 3. Check if the connector CN4 on the RADF board is disconnected from the exit/reverse sensor or the harnesses are open circuited. Correct if any. 4. Replace the exit/reverse sensor. 5. Replace the RADF board. 6. Replace the exit roller if it is worn out.

← Xem tất cả mã lỗi Toshiba e-Studio 305

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie