Code: EAA0
Description: Power-ON jam: Paper exists at No.1 paper sensor, No. 2 paper sensor, No.3 paper sensor, vertical path paper sensor or delivery sensor when power is turned ON. [MJ-1024/MJ-1101]
Remedy: MJ-1024 1. Check if there is any paper on the transport path of the saddle stitcher or the finisher. Remove it if there is. 2. Is any of the connectors J9, J10 and J13 on the saddle stitcher controller PC board disconnected? 3. Check if the connectors on the saddle stitcher controller PC board are disconnected from the No. 1 paper sensor (PI18), No. 2 paper sensor (PI19), No. 3 paper sensor (PI20), vertical path paper sensor (PI17) and delivery sensor (PI11), or the harnesses are open circuited. Correct if any. 4. Is each of the sensors (No.1 paper sensor, No.2 paper sensor, No.3 paper sensor, the vertical path paper sensor, and the delivery sensor) working properly? (Check the movement of the actuator.) 5. Replace the sensor. 6. Replace the saddle stitcher controller PC board.