Description: Entrance motor abnormality: The entrance motor is not rotating normally. [MJ-1107/1108]
Causes: MJ-1107 Entrance motor (M1) Finisher controller PC board MJ-1108 Entrance motor Finisher control PC board
Remedy: MJ-1107 Entrance roller If there is mechanical problem when the entrance roller is rotated, fix the mechanism. Entrance motor (M1) Check the connectors and harnesses between the entrance motor (M1) and the finisher control PC board (CN7). MJ-1108 Feeding roller Rotate the feeding roller. Fix any mechanical problem. Entrance motor Check if the connector (CN26) on the finisher controller PC board is disconnected from the entrance motor (M1) and the harnesses are open circuited. Correct if so.