Description: Buffer roller drive motor abnormality: The buffer roller drive motor is not rotating or the buffer roller is not moving normally. [MJ-1107/1108]
Causes: MJ-1107 Buffer roller drive motor (M6) Finisher controller PC board MJ-1108 Buffer roller drive motor Finisher controller PC board
Remedy: MJ-1107 Buffer roller If there is mechanical problem when the buffer roller is rotated, fix the mechanism. Buffer roller drive motor (M6) Check the connectors and harnesses between the buffer roller drive motor (M6) and the finisher control PC board (CN18). MJ-1108 Buffer roller Rotate the buffer roller. Fix any mechanical problem. Buffer roller drive motor Check if the connector (CN11) on the finisher controller PC board is disconnected from the buffer roller drive motor (M4) and the harnesses are open circuited. Correct if so.