Description: ADI-HDD error: Illegal disk replacement detected (ADI-HDD Exchange to SATA-HDD)
Causes:
Remedy: Setting Check if the HDD has been replaced with a SATA-HDD (normal type). 1. Start the equipment in the 4C mode: [4] + [C] + [POWER] 2. Check the type of the HDD shown on the top left of the control panel display "Current HDD type". 2a. In case of "SATA-HDD" (normal type), replace it with the original ADI-HDD or a new ADI-HDD. Notes: To replace with the original ADI-HDD, start the equipment in the normal mode and then reinstall system software only if any abnormality occurs. 2b. In case of "ADI-HDD" Check each item in the Measures field for the HDD below. If the error still occurs, reinstall the system software. HDD • Connector check • Harness check Follow the procedure below if no abnormality is found in the check items above. 1. Start the equipment in the 4C mode: [4] + [C] + [POWER] -> 1. Revert factory initial status HDD 2. Reinstall the system software.