Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E440 — Toshiba e-Studio 306SE

Code: E440

Description: Feed cover open jam: The feed cover has opened during printing.
Causes: Feed cover opening/closing detection sensor LGC board
Remedy: 1 Is the feed cover open? Yes Remove the paper if there is any, then close the cover. No 2 2 Is the feed cover opening/ closing detection sensor working? (Perform the input check in the test mode: 03- [FAX]ON/[9]/[E]) Yes 3 No • Check if the connector of the feed cover opening/closing detection sensor is disconnected. • Check if the connector CN311 on the LGC board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor pattern on the LGC board is short circuited or open circuited. • Replace the feed cover opening/closing detection sensor. • Replace the LGC board. 3 Replacing board • Replace the LGC board.

← Xem tất cả mã lỗi Toshiba e-Studio 306SE

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie