Description: Jam not reaching the read sensor: The original does not reach the read sensor after it has passed the registration sensor (when scanning obverse side) or the reverse sensor (when scanning reverse side).
Causes: Read sensor RADF board Registration roller Replace it if it is worn out. Read roller Replace it if it is worn out.
Remedy: Registration sensor Read roller Clean the registration roller and the read roller if they are stained. Read sensor • Sensor check (Perform the input check: 03-[FAX] ON[7]/[G]) • Connector check (CN76) • Harness check RADF board • Board check • Connector check (CN76) • Harness check