Code: F51
Description: Communications error between system-CPU and AI board during pre-scanning
Remedy: 1. Check if the AI board is securely connected to the connector on the IMG board. 2. Check if the IMG board is securely connected to the MTH1 board. 3. Check if the SYS board is securely connected to the MTH1 board. 4. Check if FROM is mounted on the IC8 on the AI board. 5. Check if FROM is mounted in the proper direction on the AI board. 6. Replace the AI board. 7. Replace the IMG board. 8. Replace the SYS board. 9. Replace the MTH1 board. * Service call [F51] occurs only when copying with the original mode “AI” selected. The other original modes are operable.