Code: E12
Description: Bypass misfeeding (paper not reaching the registration sensor)
Remedy: Open the jam access cover. Is there any paper in front of the registration sensor? YES Remove the paper. NO Is the registration sensor working? (Perform the input check in the test mode: 03-[FAX]ON/[2]/[A]) NO 1. Check if the connector of the registration sensor is disconnected. 2. Check if the connector J313 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open-circuited. 4. Check if the conductor pattern on the LGC board is short- or open-circuited. 5. Replace the registration sensor. 6. Replace the LGC board. YES Is the bypass feed clutch working? (Perform the output check in the test mode: 03-204) NO 1. Check if the connector of the bypass feed clutch is disconnected. 2. Check if the connector J316 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open-circuited. 4. Check if the conductor pattern on the LGC board is short- or open-circuited. 5. Replace the bypass feed clutch. 6. Replace the LGC board. YES Check the bypass feed roller and separation pad. Replace them if they are worn out.