Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E36 — Toshiba e-Studio 35

Code: E36

Description: Paper fed from the PFP lower cassette not reaching the PFP upper feed sensor
Remedy: Open the PFP side cover. Is there any paper in front of the PFP upper feed sensor? YES Remove the paper. NO Is the PFP upper feed sensor working? (Perform the input check in the test mode: 03-[FAX]OFF/[2]/[D] NO 1. Check if the connector of the PFP upper feed sensor is disconnected. 2. Check if either of the connectors CN241 or CN243 on the PFP board is disconnected. 3. Check if the connector J312 on the LGC board is disconnected. 4. Check if the connector pins are disconnected and the harnesses are open-circuited. 5. Check if the conductor patterns on the PFP board and LGC board are short- or open-circuited. 6. Replace the PFP upper feed sensor. 7. Replace the PFP board. 8. Replace the LGC board. YES Is the PFP transport clutch working? (Perform the output check in the test mode: 03-225) NO 1. Check if the connector of the PFP transport clutch is disconnected. 2. Check if any of the connectors CN241, CN242 and CN244 on the PFP board is disconnected. 3. Check if the connector J312 on the LGC board is disconnected. 4. Check if the connector pins are disconnected and the harnesses are open-circuited. 5. Check if the conductor patterns on the PFP board and LGC board are short- or open-circuited. 6. Replace the PFP transport clutch. 7. Replace the PFP board. 8. Replace the LGC board. YES Check the PFP transport roller. Replace it if it is worn out.

← Xem tất cả mã lỗi Toshiba e-Studio 35

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie