Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi EA4 — Toshiba e-Studio 35

Code: EA4

Description: Finisher front door opened during printing
Remedy: MJ-1011 Is there any paper remaining on the transport path in the finisher or main unit? YES Remove the paper. NO Is the finisher connected with the main unit? NO Connect the finisher with the main unit. YES Is the connector J11 on the finisher controller PC board disconnected? Is the harness connecting the finisher controller PC board and joint sensor (S4D) open-circuited? YES Connect the connector securely. Replace the harness. NO Is the joint sensor working properly? NO 1. Connect the connector of the joint sensor securely. 2. Replace the joint sensor. YES Replace the finisher controller PC board.
MJ-1012/1013 (Finisher section) Is there any paper remaining on the transport path in the finisher or main unit? YES Remove the paper. NO Is the finisher connected with the main unit? NO Connect the finisher with the main unit. YES Is the connector J12 on the finisher controller PC board disconnected? Is the harness connecting the finisher controller PC board and joint sensor (PI15) open-circuited? YES Connect the connector securely. Replace the harness. Is the joint sensor working properly? NO 1. Connect the connector of the joint sensor securely. 2. Replace the joint sensor. YES Is the door of the finisher closed? NO Close the door. YES Is the connector J12 on the finisher controller PC board disconnected? Is the harness connecting the finisher controller PC board and door opening sensor (PI16) open-circuited? YES Connect the connector securely. Replace the harness. NO Is the door opening sensor working properly? NO 1. Connect the connector of the door opening sensor securely. 2. Replace the door opening sensor. YES Is the connector J5 on the finisher controller PC board disconnected? Is the harness connecting the finisher controller PC board and door switch (MS1) open-circuited? YES Connect the connector securely. Replace the harness. NO Is the door switch working properly? NO 1. Connect the connector of the door switch securely. 2. Replace the door switch. YES Is the connector J5 on the punch driver PC board disconnected? Is the harness connecting the punch driver PC board and upper door switch (MS1P) open-circuited? Is the harness connecting the punch driver PC board and front door switch (MS2P) open-circuited? YES Connect the connector securely. Replace the harness. NO Are the upper and front door switches working properly? NO 1. Connect the connectors of the upper and front door switches securely. 2. Replace the upper/front door switches. YES Replace the finisher controller PC board.

← Xem tất cả mã lỗi Toshiba e-Studio 35

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie