Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E951 — Toshiba e-Studio 350

Code: E951

Description: Stop jam at the job separator transport sensor: The trailing edge of the paper does not pass the job separator transport sensor.
Remedy: Open the JSP cover. Is there any paper on the transport path? YES Remove the paper. NO Is the JSP feed sensor working? (Perform the input check in the test mode:03-[FAX]ON/[3]/[H]) NO 1. Check if the connector of the JSP feed sensor is disconnected. 2. Check if either of the connectors CN260 or CN261 on the JSP board is disconnected. 3. Check if the connector CN302 on the LGC board is disconnected. 4. Check if the connector pins are disconnected and the harnesses are opencircuited. 5. Check if the conductor patterns on the JSP board and LGC board are shortor open-circuited. 6. Replace the JSP feed sensor. 7. Replace the JSP board. 8. Replace the LGC board. YES 1. Replace the JSP board. 2. Replace the LGC board.

← Xem tất cả mã lỗi Toshiba e-Studio 350

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie