Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi CB10 — Toshiba e-Studio 3500c

Code: CB10

Description: Entrance motor abnormality: The entrance motor is not rotating normally.
Causes: Entrance motor (M1) Finisher controller PC board
Remedy: MJ-1101 Entrance roller If there is mechanical problem when the entrance roller is rotated, fix the mechanism. Entrance motor (M1) Check the connectors and harnesses between the entrance motor (M1) and the finisher control PC board (CN7).
MJ-1106 Feeding roller Rotate the feeding roller. Fix any mechanical problem. Entrance motor Check if the connector (CN26) on the finisher controller PC board is disconnected from the entrance motor (M1) and the harnesses are open circuited. Correct if so.

← Xem tất cả mã lỗi Toshiba e-Studio 3500c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie