Description: [C4E0] Fuser pressure roller release abnormality [C4E1] Fuser pressure roller contact/semi-contact abnormality. The releasing behavior of the pressure roller cannot be detected/the abnormality of the sensor of the fuser unit. (C4E0) The contacting/semi-contacting behavior of the pressure roller cannot be detected/the abnormality of the sensor of the fuser unit. (C4E1
Remedy: Pressure roller contact/release detection sensor (S29) • Sensor check (Perform the input check: FS-03-[F3]ON/[2]/[H]) • Connector check (CN306, J605) • Harness check Pressure roller contact/release motor (M13) ¡E Motor check (Perform the output check: FS-03-272) ¡E Connector check (CN305, J602) ¡E Harness check Fuser unit ¡E Drawer connector check ¡E Thermostat check ¡E Unit check Check if the adjustment value for the tilting of the fuser unit is aligned to the uppermost line of the scale. Refer to P. 8-371 "8.5.36 Image Skewing on Paper Trailing Edge". LGC board E Connector check (CN305, CN306) ¡E Board check