Description: Transport motor abnormality * You receive a [CC31] error when the [ED12] error occurs three times in succession. The transport motor is not rotating or the stack transport roller -1 and -2 is not rotating normally. MJ-1109/1110
Causes: Transport motor (M7) Finisher control PC board (FIN)
Remedy: Stack transport roller -1 Stack transport roller -2 Rotate the stack transport roller -1 and -2. Fix any mechanical problem. Transport motor Check if the connector (CN15) on the finisher control PC board is disconnected from the transport motor (M7) and the harnesses are open circuited. Correct if so.