Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E552 — Toshiba e-Studio 3505AC

Code: E552

Description: Paper remaining jam on the transport path (when the cover is closed)
Causes: Feed or transport roller possibly causing multiple feeding Sensor in the jamming area Refer to the table below. LGC board
Remedy: 1 Jamming transport path Open the cover of the unit/area whose picture is flashing on the control panel and remove any paper on the transport path. 2 Sensor in the jamming area • Sensor check (Refer to the table below) • Harness check • Connector check 3 LGC board • Harness check • Connector check • Board check Notes: If the jam is occurring in the ADU, LCF or PFP, check the board in each unit.
Registration area Jam access cover Registration sensor FS-03-[ALL]OFF/[9]/[A] Paper clinging detection sensor FS-03-[ALL]OFF/[9]/[E] Registration pass sensor FS-03-[ALL]OFF/[9]/[F] Feed sensor FS-03-[ALL]OFF/[9]/[B] Exit area Fuser cover Exit sensor FS-03-[ALL]OFF/[9]/[C] ADU ADU ADU entrance sensor FS-03-[ALL]OFF/[9]/[G] ADU exit sensor FS-03-[ALL]OFF/[9]/[H] Bypass feed unit Side cover 2nd drawer feed sensor FS-03-[F3]ON/[4]/[D] LCF LCF side cover LCF transport sensor FS-03-[F1]ON/[9]/[F] PFP PFP side cover PFP upper drawer feed sensor FS-03-[F3]ON/[0]/[C] PFP lower drawer feed sensor FS-03-[F3]ON/[0]/[D] Bridge unit Bridge unit Bridge unit transport sensor-1 (Entrance sensor) FS-03-[ALL]OFF/[0]/[A] Bridge unit transport sensor-2 (Exit sensor) FS-03-[ALL]OFF/[0]/[B] Finisher Finisher door Sensors in the finisher

← Xem tất cả mã lỗi Toshiba e-Studio 3505AC

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie