Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi EA24 — Toshiba e-Studio 3505AC

Code: EA24

Description: [MJ-1109/1110] Paper stopping jam (between the entrance and transport sensors):
Causes: MJ-1109/MJ-1110 Transport path switching solenoid (SOL5) Entrance sensor (S1) Transport sensor (S2) Entrance motor (M1) Finisher control PC board (FIN)
Remedy: MJ-1109/MJ-1110 Paper Check if there is any paper in the finisher or on the transport path of the equipment and remove it if there is. Pinch roller arm Check the position of pinch roller arm. If it is down, fix its mechanism. Transport path switching solenoid (SOL5) • Check that the gap between the transfer guide surface and the upper surface of the flapper tip is in the acceptable range according to the status of the transport path switching solenoid (SOL5) (solenoid OFF: 1.5 to 2.1 mm, solenoid ON: 2.3 to 2.9 mm). If it is not, adjust it. • Check the harness between the transport path switching solenoid (SOL5) and the finisher controller board (CN1). If there is any abnormality, correct it. Entrance sensor (S1) • Sensor check • Connector check • Harness check Transport sensor (S2) • Sensor check • Connector check • Harness check Entrance motor (M1) • Motor check • Connector check • Harness check Finisher control PC board (FIN) • Board check • Connector check (CN8, CN17) • Harness check

← Xem tất cả mã lỗi Toshiba e-Studio 3505AC

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie