Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi EA26 — Toshiba e-Studio 3505AC

Code: EA26

Description: [MJ-1042] Paper stopping jam (stop command request)
Causes: Finisher control PC board (FIN) LGC board (LGC)
Remedy: MJ-1042 Finisher • Check if the harness connecting the equipment and the finisher control PC board is disconnected or open circuited. • Check if the conductor pattern on the finisher controller PC board is open circuited or short circuited. • Update the finisher firmware. • Replace the finisher control PC board. LGC board • Check if the harness connecting the finisher and the LGC board on the equipment is disconnected or open circuited. • Connector check • Check if the conductor pattern on the LGC board is open circuited or short circuited. • Replace the LGC board.

← Xem tất cả mã lỗi Toshiba e-Studio 3505AC

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie