Description: Skew adjustment motor (M1) abnormality: Skew adjustment motor is not rotating or puncher is not shifting normally. * The [CC52] error occurs when the [ED10] error occurs three times in succession or during the initial operation. MJ-1109/1110 (When MJ-6105 is installed)
Causes: Skew home position sensor (S2) Skew adjustment motor (M1) Hole punch control PC board (HP)
Remedy: Finisher related service call Skew adjustment motor (M1) abnormality: Skew adjustment motor is not rotating or puncher is not shifting normally. Check Item Measure Paper If there is any paper remaining on the transport path, remove the paper. Skew adjustment motor (M1) • If there is mechanical problem when the skew adjustment motor (M1) is rotated, fix the mechanism. • Check the connector (CN10) and harnesses between the hole punch control PC board (HP) and skew adjustment motor (M1). Skew home position sensor (S2) • Sensor check • Harness check • Connector check (CN10)