Description: Front cover open jam: The front cover has opened during printing.
Causes: Front cover switch LGC board
Remedy: 1 Is the front cover open? Yes Close the cover. No 2 2 Is the front cover switch working? (Perform the input check in the test mode: FS-03- [ALL]OFF/[7]/[C]) Yes 3 No • Check if the connector of the front cover switch is disconnected. • Check if the connector CN319 on the LGC board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor pattern on the LGC board is short circuited or open circuited. • Replace the front cover switch. • Replace the LGC board. 3 Is the voltage of 24V being supplied from the power supply unit? (Perform the input check in the test mode: FS-03- [ALL]OFF/[7]/[D]) Yes 4 No • Check if the connector for 24 V power supply is disconnected. • Check if the connector CN301 on the LGC board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor pattern on the LGC board is short circuited or open circuited. • Replace the LGC board. 4 LGC board • Replace the LGC board.