Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi ED14 — Toshiba e-Studio 3508A

Code: ED14

Description: Rear alignment plate home position error: The rear alignment plate is not at the home position. [MJ- 1109/1110]
Causes: Rear alignment plate home position sensor (S8) Rear alignment motor (M6) Finisher controller PC board (FIN)
Remedy: Rear alignment plate Move the rear alignment plate. Fix any mechanical problem. Rear alignment plate home position sensor (S8) Check if there is a disconnection of the connector, incorrect installation or breakage of the rear alignment plate home position sensor (S8). If there is, reinstall the sensor correctly or replace it. Check if the connector (CN25) on the finisher controller PC board is disconnected from the rear alignment plate home position sensor (S8) and the harnesses are open circuited. Correct if so. Rear alignment motor (M6) Check if the connector (CN18) on the finisher controller PC board is disconnected from the rear alignment motor (M6) and the harnesses are open circuited. Correct if so.

← Xem tất cả mã lỗi Toshiba e-Studio 3508A

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie