Remedy: 1 Is the feed cover open? Yes Remove the paper if there is any, then close the cover. No 2 2 Is the feed cover opening/ closing switch working? (Perform the input check in the test mode: FS-03- [F3]ON/[4]/[A]) Yes 3 No • Check if the connector of the feed cover opening/closing switch is disconnected. • Check if the connector CN318 on the LGC board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor pattern on the LGC board is short circuited or open circuited. • Replace the feed cover opening/closing switch. • Replace the LGC board. 3 Replacing board • Replace the LGC board.