Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi EA70 — Toshiba e-Studio 3508AG

Code: EA70

Description: Stack exit belt home position error: The stack exit belt is not at the home position. [MJ-1109/1110]
Causes: Stack belt exit home position sensor (S9) Stack transport motor (M8) Finisher controller PC board (FIN)
Remedy: Stack belt exit home position sensor (S9) Check if there is a disconnection of the connector, incorrect installation or breakage of the stack belt exit home position sensor (S9). If there is, reinstall the sensor correctly or replace it. Check if the connector (CN25) on the finisher controller PC board is disconnected from the stack belt exit home position sensor (S9) and the harnesses are open circuited. Correct if any. Stack transport motor (M8) Check if the connector (CN18) on the finisher controller PC board is disconnected from the stack transport motor (M8) and the harnesses are open circuited. Correct if any.

← Xem tất cả mã lỗi Toshiba e-Studio 3508AG

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie