Code: 7D00
Display: Jam Inside 3 Remove the jammed paper, then press Start.
Description: When the power switch was turned ON, the eject sensor detected paper pass. (Cannot determine whether the top cover is open or whether it is a paper jam.)
Remedy: 1 Eject actuator caught in sections of the machine Reattach the eject actuator. 2 Paper feed/paper printing position sensor PCB failure Replace the paper feed/paper printing position sensor PCB ASSY. 3 Eject sensor failure Replace the eject sensor PCB ASSY. 4 Main PCB failure Replace the main PCB ASSY.