Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E520 — Toshiba e-Studio 3511

Code: E520

Description: Jam not reaching the ADU entrance sensor: The paper does not reach the ADU entrance sensor after it is switchbacked in the exit section.
Remedy: Open the ADU. Is there any paper in front of the ADU entrance sensor? YES Remove the paper. NO Is the ADU entrance sensor working? (Perform the input check: 03-[FAX]OFF/[8]/[G]) NO 1. Check if the connector of the ADU entrance sensor is disconnected. 2. Check if either of the connectors CN211 or CN214 on the ADU board is disconnected. 3. Check if the connector CN340 on the LGC board is disconnected. 4. Check if the connector pins are disconnected or the harnesses are open-circuited. 5. Check if the conductor patterns on the ADU board and LGC board are short- or open- circuited. 6. Replace the ADU entrance sensor. 7. Replace the ADU board. 8. Replace the LGC board. YES Is the exit motor (rotating in reverse) working? (Perform the output check: 03-121/171) NO 1. Check if the connector of the exit motor is disconnected. 2. Check if the connectors CN437 and J434 on the DRV board is disconnected. 3. Check if the connector CN360 on the LGC board is disconnected. 4. Check if the connector pins are disconnected or the harnesses are open-circuited. 5. Check if the conductor patterns on the DRV board and LGC board are short- or open-circuited. 6. Replace the exit motor. 7. Replace the DRV board. 8. Replace the LGC board. YES Is the ADU motor working? (Perform the output check: 03-110/160) NO 1. Check if the connector of the ADU motor is disconnected. 2. Check if any of the connectors CN211, CN212 and CN215 on the ADU board is disconnected. 3. Check if the connector CN340 on the LGC board is disconnected. 4. Check if the connector pins are disconnected or the harnesses are open-circuited. 5. Check if the conductor patterns on the ADU board and LGC board are short- or open- circuited. 6. Replace the ADU board. 7. Replace the LGC board. YES Check the rollers in the ADU and the exit roller of the equipment. Replace them if they are worn out.

← Xem tất cả mã lỗi Toshiba e-Studio 3511

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie