Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi CC80 — Toshiba e-Studio 351c

Code: CC80

Description: Front alignment motor abnormality: Front alignment motor is not rotating or front aligning plate is not moving normally. [MJ-1022] Front aligning plate motor abnormality: Front aligning plate motor is not rotating or aligning plate is not moving normally. [MJ-1023/1024]
Remedy: MJ-1022 (Front jogging motor abnormality) Is the front jogging plate home position sensor (S6) working properly? → NO → Replace the sensor. YES Is the wiring between the finisher controller PC board and front jogging motor (M3) correct? → NO → Correct the wiring. YES Has the rack run over the stopper of the roll? → YES → Fix it. NO 1) Replace the front jogging motor. 2) Replace the finisher controller PC board. MJ-1023/1024 (Front aligning plate motor abnormality) Is the front aligning plate home position sensor (PI36) normal? → NO → Replace the sensor. YES Is the wiring between the finisher controller PC board and the front aligning plate motor (M33) correct? → NO → Correct the wiring. YES Is there any mechanical problem with the path of aligning plate? → NO → Fix the mechanism. YES 1) Replace the front aligning plate motor. 2) Replace the finisher controller PC board.

← Xem tất cả mã lỗi Toshiba e-Studio 351c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie