Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi CF30 — Toshiba e-Studio 351c

Code: CF30

Description: Reference plate detection voltage abnormality: The output value of the color auto-toner sensor against the reference plate is out of a specified range at the light amount correction during an auto-toner adjustment or when a print job has finished.
Remedy: Are the reference plate and color auto-toner sensor stained? → YES→ Clean them. NO Is the color auto-toner sensor shutter solenoid working normally? (Perform the output check: 03-125/175) Is the color auto-toner sensor working? ↓→ NO → 1) Check if the connectors or joint connectors of the color auto-toner sensor shutter solenoid and color auto-toner sensor are disconnected. 2) Check if the connector CN332 on the LGC board is disconnected. 3) Check if the connector pins are disconnected or the harnesses are open circuited. 4) Replace the color auto-toner sensor shutter solenoid. 5) Check if the conductor pattern on the LGC board is short circuited or open circuited. 6) Replace the LGC board. 7) Replace the color auto-toner sensor and perform “Enforced correction of color auto-toner sensor light amount (05-208)”. YES Is the color auto-toner sensor shutter closing position correct? (Perform the output check: 03-125/175) ↓→ NO → Adjust the install position of solenoid so that the gap between the sensor holder and stopper will be 1.0 mm when closing the shutter. YES 1) Replace the LGC board. 2) Replace the reference plate and perform “Initialization of color auto-toner sensor light amount correction target value (05-207)”.

← Xem tất cả mã lỗi Toshiba e-Studio 351c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie