Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E030 — Toshiba e-Studio 351c

Code: E030

Description: Power-ON jam: The paper is remaining on the paper transport path when power is turned ON.
Remedy: Open the cover of the unit/area whose picture is flashing on the control panel. Is there any paper on the transport path? (Refer to the following table) → YES → Remove the paper. NO Is the sensor in the jamming area working? (Perform the input check: Refer to the following table.) ↓→ NO → 1) Check if the connector of the sensor is disconnected. 2) Check if any of the connectors on the LGC board is disconnected. 3) Check if the connector pins are disconnected or the harnesses are open circuited. 4) Check if the conductor pattern on the LGC board is short circuited or open circuited. 5) Replace the sensor. 6) Replace the LGC board. NO Replace the LGC board.
Registration area Jam access cover Registration sensor 03-[FAX]ON/[9]/[E] Upper drawer feed sensor 03-[FAX]ON/[3]/[H] Exit area Fuser cover Exit sensor 03-[FAX]OFF/[7]/[H] ADU ADU ADU entrance sensor 03-[FAX]OFF/[8]/[H] ADU exit sensor 03-[FAX]OFF/[8]/[G] Feeding area (equipment) Side cover Lower drawer feed sensor 03-[FAX]ON/[3]/[G] Bypass unit Bypass unit Bypass feed sensor 03-[FAX]ON/[9]/[D] LCF LCF side cover LCF feed sensor 03-[FAX]OFF/[5]/[G] PFP PFP side cover PFP upper drawer feed sensor 03-[FAX]OFF/[2]/[D] PFP lower drawer feed sensor 03-[FAX]OFF/[4]/[D] Bridge unit Bridge unit Bridge unit transport sensor-1 03-[FAX]ON/[0]/[C] Bridge unit transport sensor-2 03-[FAX]ON/[0]/[A]

← Xem tất cả mã lỗi Toshiba e-Studio 351c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie