Description: Feed signal reception jam: The feed signal is received even no original exists on the original feeding tray.
Remedy: Is the empty sensor working? (Perform the input check: 03-[FAX]ON/[7]/[B]) → YES → Clean the rollers or replace them. NO Is the original excessively curled or folded? → YES → Flatten and set it again. NO Are the original length sensor and registration sensor working? (Perform the input check: 03-[FAX]ON/[8]/[E], [7]/[H]) ↓→ NO → 1) Check if the lever of empty sensor is working normally. 2) Check if the connector of the empty sensor is disconnected. 3) Check if the connector CN75 on the RADF board is disconnected. 4) Check if the connector pins are disconnected or the harnesses are open circuited. 5) Check if the conductor pattern on the RADF board is short circuited or open circuited. 6) Replace the empty sensor. 7) Replace the RADF board. YES Replace the RADF board.