Code: EA50
Description: Stapling jam: Stapling is not performed properly.
Remedy: MJ-1022 Is there any paper remaining on the transport path in the finisher or equipment or on the stapling tray? → YES → Remove the paper. NO Is the jam cleared by taking off the staple cartridge from the finisher and removing the staple sheet slid from the staple case? → YES → End. NO Is the connector J8 on the finisher controller PC board disconnected? Is the harness connecting the finisher controller PC board and stapling home position sensor (S17) open circuited? → YES → Connect the connector securely. Replace the harness. NO Is the stapling home position sensor working properly? ↓→ NO → 1) Connect the connector of the stapling home position sensor securely. 2) Replace the stapling home position sensor. YES Replace the finisher controller PC board.
MJ-1023/1024 Is there any paper remaining on the transport path in the finisher or equipment or on the stapling tray? → YES → Remove the paper. NO Is the jam cleared by taking off the staple cartridge from the finisher and removing the staple sheet slid from the staple case? → YES → End. NO Is the connector J721B on the finisher controller PC board disconnected? Is the harness connecting the finisher controller PC board and staple home position sensor (PI40) open circuited? → YES → Connect the connector securely. Replace the harness. NO Is the staple home position sensor working properly? ↓→ NO → 1) Connect the connector of the staple home position sensor securely. 2) Replace the staple home position sensor. YES Replace the finisher controller PC board.
MJ-1023/1024 Is there any paper remaining on the transport path in the finisher or equipment or on the stapling tray? → YES → Remove the paper. NO Is the jam cleared by taking off the staple cartridge from the finisher and removing the staple sheet slid from the staple case? → YES → End. NO Is the connector J721B on the finisher controller PC board disconnected? Is the harness connecting the finisher controller PC board and staple home position sensor (PI40) open circuited? → YES → Connect the connector securely. Replace the harness. NO Is the staple home position sensor working properly? ↓→ NO → 1) Connect the connector of the staple home position sensor securely. 2) Replace the staple home position sensor. YES Replace the finisher controller PC board.