Description: Door open jam: The delivery cover or inlet cover has opened dur-ing printing [MJ-1024].
Remedy: MJ-1024 Is there any paper remaining on the transport path in the finisher, saddle stitcher section or equipment? → YES → Remove the paper. NO Is the saddle stitcher door closed? → NO → Close the door. YES Is either of the connectors J10 or J11 on saddle stitcher controller PC board disconnected? Are the harnesses between the saddle stitcher controller PC board and cover opening sensors (delivery cover sensor [PI3], inlet cover sensor [PI9]) open circuited? → YES → Connect the connector securely. Replace the harness. NO Is each of the sensors (delivery cover sensor, inlet cover sensor) working properly? ↓→ NO → 1) Connect the connectors of the each sensor securely. 2) Replace the sensors. YES Replace the finisher controller PC board.