Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi EAB0 — Toshiba e-Studio 351c

Code: EAB0

Description: Transport stop jam: The paper which passed through the inlet sensor does not reach or pass No.1 paper sensor, No. 2 paper sensor, No.3 paper sensor or delivery sensor. [MJ-1024]
Remedy: MJ-1024 Is there any paper remaining on the transport path in the finisher, saddle stitcher section or equipment? → YES → Remove the paper. NO Is the connector J708 on finisher controller PC board disconnected? Is the harness between the finisher controller PC board and inlet sensor [PI33] open circuited? Is either of the connectors J9 or J10 on the saddle stitcher controller PC board disconnected? Is the harness between the saddle stitcher controller PC board and each sensor (No.1 paper sensor [PI18], No.2 paper sensor [PI19], No.3 paper sensor [PI20] and the delivery sensor [PI11]) open circuited? → YES → Connect the connectors securely. Replace the harnesses. NO Is each of the sensors (the inlet sensor, No.1 paper sensor, No.2 paper sensor, No.3 paper sensor and the delivery sensor) working properly? (Check the movement of the actuator.) ↓→ NO → 1) Connect the connectors of the sensors securely. 2) Attach the actuators securely if their shafts are out of place. 3) Replace the sensors. YES Replace the saddle stitcher controller PC board.

← Xem tất cả mã lỗi Toshiba e-Studio 351c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie