Description: Carriage home position sensor not turning OFF within a specified period of time: The carriage does not shift from its home position in a specified period of time.
Remedy: Are the carriages slightly moved to the feeding direction? Are the carriages staying at a position other than home position? YES 1. Check if the connector of the scan motor is disconnected. 2. Check if the connector pin is disconnected and the harness is short-or opencircuited. 3. Replace the SLG board. NO 1. Check if the connector pin is disconnected and the harness is short- or open-circuited. 2. Check if the conductor pattern on the SLG board is short- or open-circuited. 3. Replace the SLG board.