Description: IH control circuit or IH coil abnormality: Abnormality is detected in IH control circuit or IH coil is broken/shorted.
Remedy: 1. Check the IH board (1) Check if the conductor pattern on the board is short or open-circuited. (2) Replace the IH board. 2. Check the IH coil (1) Check if the coil is broken or shorted. (2) Replace the IH coil. 3. Clear the status counter Change the values “13”, “16” or “19” of the status counter (08-400) to “0”. * The status counter value is as follows in the following cases. Change them to "0" respectively. • The error occurred before the temperature of the fuser roller reaches 40°C: "13" • The error occurred before the equipment has become ready: "16" • The error occurred when the equipment is in the ready state or during printing: "19"