Code: CB40
Description: Rear aligning plate motor abnormality: Rear aligning plate motor is not rotating or aligning plate is not moving normally. [MJ-1024] Front alignment motor abnormality: The front alignment motor is not rotating or the front alignment plate is not moving normally. [MJ-1101]
Remedy: MJ-1024 Is the rear aligning plate home position sensor (PI37) normal? NO Correct the wiring. YES Is there any mechanical problem with the path of aligning plate? NO Fix the mechanism. YES 1. Replace the rear aligning plate motor. 2. Replace the finisher controller PC board.
MJ-1101 Is there any mechanical problem when the front alignment plate is moved? ..YES Fix the mechanism. NO Is the harness between the front alignment motor (M9) and the finisher control PC board (CN10) disconnected or open circuited? l ..YES • Reconnect the connector securely. • Replace the harness. NO Replace the front alignment motor (M9).
MJ-1101 Is there any mechanical problem when the front alignment plate is moved? ..YES Fix the mechanism. NO Is the harness between the front alignment motor (M9) and the finisher control PC board (CN10) disconnected or open circuited? l ..YES • Reconnect the connector securely. • Replace the harness. NO Replace the front alignment motor (M9).