Description: Feed cover open jam: The feed cover has opened during printing.
Remedy: Is the feed cover open? YES Remove the paper if there is any, then close the cover. NO Is the feed cover opening/closing detection sensor working? (Perform the input check in the test mode: 03-[FAX]ON/[9]/[E]) NO 1. Check if the connector of the feed cover opening/closing detection sensor is disconnected. 2. Check if the connector CN311 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open circuited. 4. Check if the conductor pattern on the LGC board is short circuited or open circuited. 5. Replace the feed cover opening/closing detection sensor. 6. Replace the LGC board. YES Replace the LGC board.