Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi EA70 — Toshiba e-Studio 355

Code: EA70

Description: Stack delivery jam: It cannot deliver the stack of paper on the intermediary process tray to the stack tray. [MJ-1025] Stack slider home position error: The stack slider is not at the home position. [MJ-1031]
Remedy: MJ-1025 Is there any paper remaining on the stapling tray? YES Remove the paper. NO Are the paper on the stack tray and the latches of the stack delivery belt contacting each other? YES Remove the paper on the stack tray. NO Is any of the connectors CN5 (delivery belt home position sensor), CN13 (delivery motor) on the finisher controller PC board disconnected? Is the harness connecting the finisher controller PC board and delivery belt home position sensor open-circuited? Is the harness connecting the finisher controller PC board and delivery motor opencircuited? YES Connect the connector securely. Replace the harness. NO Is the delivery belt home position sensor working properly? NO Replace the sensor. YES Is the delivery motor working properly? NO Replace the motor. YES Rotate the delivery motor by hand. Is there any mechanical problem with the rotation of the stack delivery belt? Are the latches of the stack delivery belt damaged? YES Fix the mechanism. NO Replace the finisher controller PC board.
MJ-1101 1. Check if the connector CN11 on the finisher controller PC board is disconnected from the stack belt exit home position sensor (S9) and the harnesses are open circuited. Correct if any. 2. Is the harness between the stack transport motor (M5) and the finisher control PC board (CN10) disconnected or open circuited? 3. Replace the sensor. 4. Replace the finisher controller PC board.
MJ-1031 1. Check if the connector J111 on the finisher controller PC board is disconnected from the stack edging HP sensor (SR8) or the harnesses are open circuited. Correct if any. 2. Check if the connector J111 on the finisher controller PC board is disconnected from the stack slide motor (M4) or the harnesses are open circuited. Correct if any. 3. Replace the stack slider HP sensor. 4. Replace the stack slide motor. 5. Replace the finisher controller PC board.

← Xem tất cả mã lỗi Toshiba e-Studio 355

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie